Setting the Global Options

There are certain options that can be applied to all the tests globally. These options can be used to schedule the total time of the testing session. Use the following steps to edit the Global options:

1. Click on the Edit Global Options button located at the right side top of the Test Group table. This will navigate to Global Test Options page.

2. Specify the time value in minutes for the Duration of Testing option. This value will schedule the total testing time of all the tests beyond which the testing will stop.Note that for Test modes, Online Stress and Component Stress default value for Duration of Testing is set to 0 (infinite). For System Exerciser Mode, the Default Duration of Testing is 240 minutes.

3. For Verbose option, select Enable if you want to log the Verbose messages or Disable, if otherwise. Verbose messages are the console messages. If verbose is enabled then the console messages from the agent are not only displayed on the GUI console, but also logged in the log file. If this box is not checked, all verbose messages are only logged in the log file in /var/sunvts/logs/sunvts.verbose.

4. In the Duration of Logging option, set the time in minutes after which the information messages should log in the sunvts.info file.
   For example, if the duration is set to 60 minutes, the testing information messages will be logged in the sunvts.info file every 60mins.
5. Incase of Safe Testing option select the appropriate option to enable or disable data safety.

6. Click OK button to save the edited global options. Clicking Cancel button will navigate you back to Test Group page without saving the edited options. You can also navigate back to the parent page using the 'Test Group' link provided at the top of this page.